We Sell Direct from Taiwan ONLY, NO Authorized Agents in China.
Remove taps easily withot dmage the threads.
It is of portable design and its magnetic base, allows to be easily clamped on top of work piece for machining easily even on a large workpiece.
The work head is mounted on a +/- 30 degree angle slide plate.
It is a self-contained unit, complete with dielectric pump and central cooling for electrode holder.
With simple easy-to-understand operating panel on controller.
Starting hole for wire cut edm which do not need the precision.
Cutting tungsten carbide or any harden steel.
|Generator Dimensions||mm||500 × 300 × 220|
|Machine Unit Dimensions||mm||270 × 85 × 600|
|Machine Unit Weight||kg||7.5|
|Maximum Current Output||A||10|
|Electrode diameter||mm||Min Ø1.0mm / Max Ø6.3mm|
|Meterial of Electrode||Brass or Copper electrode tube|
|Generator Power Input||AC110 or AC220V, a-Phase 50/60Hz|
|Standard Accessories||Broken Tap Remover|
|Brass Electrode tubes 400mm||Ø1.0mm x 2pcs. Ø1.5mm x 2pcs.
Ø2.0mm x 2pcs. Ø2.5mm x 2pcs.
Ø3.0mm x 2pcs. Ø3.5mm x 2pcs.
Ø4.0mm x 1pc. Ø5.0mm x 1pc.
Ø6.0mm x 1pc
|Rubber Seal||Ø1.0mm x 2pcs. Ø2.0mm x 2pcs.
Ø3.0mm x 2pcs. Ø4.0mm x 2pcs.
Ø5.0mm x 2pcs
* The manufacturer reserves the right to modify the design, specification, mechanisms, …etc. of the machine without notice, all the specifications shown above are just for reference.